€ 169,90 + VAT
To drive 107x107mm posts, a hole must first be drilled into the ground. The recommended size is a 50mm hole. If the ground is very hard or dry, fill the hole with water and let it soak before driving the posts into the ground.
Our Pilot Core Tool can be used to make a pilot hole or alternatively a ground auger.
Size
Inner diameter of 107x107mm. This adapter is suitable for fitting 4×4″ square posts.
easy to install
Use a 6mm hex key to unscrew the 8 bolts and lock washers. Slide the current tube out of the base of the nailer. Slide the new adapter into place and secure with the same bolts and washers. Remember to use a locking compound on the screw threads to prevent them from chattering.
What adapters do I need?
For the most effective use of the nailer, the size of the adapter should fit your studs perfectly. We recommend that the adapter be no more than 5-10mm larger than your post. For profiled posts; squares/T-shapes, etc., outside corners must be within this capacity.
If you are unsure which adapter is right for you, please contact us for advice specific to your application.
Material: Steel
